Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Do not underestimate the forklift at the office. If the operation is bad, there will be serious mishaps in minutes, and there are several accidents involving forklifts.

Situation 1: The forklift cargo blocked the chauffeur's view, and the individual ahead could not be found, causing a rolling mishap.
Instance 2: In order to maintain the equilibrium of the forklift when raising hefty goods, the staff members utilized their body weight as the weight, which practically caused casualties.
Instance 3: The size of the forklift freight goes beyond the allowable width of the path and holds on the roadside shelf, which virtually triggers an mishap.
Instance 4: Forklift is speeding up and rolls over throughout a turn.
Case 5: The forklift driver did not observe the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift lifts the employees illegally, the forklift driver does not wear the safety belt, the forklift lifter drops and the motorist is crushed when the forklift rolls over.
Situation 7: The forklift vehicle driver did not wear a safety belt and dropped from the vehicle when it surrendered and was squashed.
Forklift procedure must take note of these matters ：.

Begin.
1. Prior to beginning, observe the surroundings, and after verifying that there are no obstacles that hinder the security of driving, honk the horn initially and afterwards begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be safe prior to beginning.
3. When the forklift starts with a tons, the motorist should initially confirm that the lots is stable and dependable.
4. The beginning must be sluggish and constant.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast should be tilted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the task website or while driving, be careful that there will certainly be no challenges overhead. When the load is traveling, the fork must not be raised expensive, which will certainly influence the security of the forklift. .
3. After discharging, the fork should be lowered to the regular driving placement before driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal ought to be provided first. High-speed doglegs are forbidden. High-speed sharp turns will create the automobile to lose lateral security and tip over. .
5. When the forklift is downhill, it is strictly restricted to shut off the fire and slide, and it is restricted to brake suddenly while driving with tons unless there are unique situations.
6. When the forklift is running, it has to obey the web traffic rules in the factory and need to keep a specific safety and security range from the vehicle in front. .
7. When the forklift is running, the tons needs to remain in the most affordable position that does not impede the driving, and the gantry needs to be properly slanted back. The tons shall not be increased except when piling or packing. .
8. The height of the tons have to not block the vehicle driver's sight. In unique situations, when the thing affects the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility location is 5 km/h, and it must drive securely at a low speed when getting in the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is prohibited for workers to stand on the fork to hold things and play a stabilizing function. .
12. If issues are found, they will certainly be fixed and reported in a timely manner, and they will certainly never operate with illnesses or hide them.

packing and unloading.
1. When fork-loading things, the range between both forks must be changed as required to make the tons of the two forks well balanced and not skewed, and one side of the thing ought to be against the shelf. .
2. It is forbidden to collaborate with a solitary fork or use a fork top or draw. In special conditions, security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and discharging things, the forklift needs to be braked with the brake. .
4. The rate of the vehicle must be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When making use of a fork to fork the goods, the fork should be as deep as feasible under the load, and it must be noted that the fork suggestion need to not touch other items or objects. The tons needs to be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted forward somewhat when the tons is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and hit tough things with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so regarding avoid the collapse of the goods and hurt individuals. .
8. Straining is prohibited, and it is restricted to utilize forks to raise employees to take part in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slide, place, round or roll things. .
10. It is not allowed to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you should discharge the goods or reduced the fork framework.
2. Draw the emergency brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the motorist does not leave the lorry's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be examined, and gas, lubricating oil and cooling water ought to be added.
2. Examine the safety and security efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. Throughout the operation of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage needs to additionally be inspected and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the vehicle;.
2. When you encounter a person before Electric Forklift Truck for Warehouse you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be also sharp to avoid the tendency of " cost-free turning";.
6. Running up and down the incline should be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is greater than 10%, the automobile ought to be driven in reverse when going downhill;.
8. When the forklift employees carry the goods and move on, if they experience huge or heavy items and go to the vehicle driver's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to Electric Forklift Truck for Warehouse utilize stopping force to exile round or easy-to-roll items.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following problems.
1. Contours, slim roadways, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844